Filter
Top Products
iBT97
Using the
8
P12
Setting and Using the Alarms (cont’d)
8. Press the – or + Buttons to adjust the alarm volume on the unit. Note that the alarm volume setting
is stored separately from other volume settings.
9. Press the Alarm 1 Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is
armed.
Previewing the Alarm and Turning the Alarm On/Off
1. Press and release the Alarm Button to view the current alarm time and wake-to source.
2. While preview is active (within 5 seconds), press and release the Alarm Button as needed to toggle
the alarm ON and OFF, indicated by the alarm icon and a beep.
Alarm Skip
If Alarm 1 or Alarm 2 is active, press and release the Wakeup/Alarm Skip Button to skip the next pending
alarm time. The display will show “ALM 1 SKIP” or “ALM 2 SKIP” until the specified alarm time is passed,
then alarm skip is deactivated and the unit returns to normal alarm function.
Setting the Gentle Wake Timer
The unit has an adjustable gentle wake feature that gradually increases the volume of the alarm from 05 up
to the set wake volume over time (the default duration is 15 seconds). You can adjust the duration of the
gradual volume increase from 15, 30, 45, 60, 90, or 120 seconds or to OFF. Setting the duration to OFF
will turn off gentle wake: the alarm will sound at the set alarm volume without a gradual volume increase.
1. To set the Gentle Wake duration, press and hold the Wakeup/Alarm Skip Button for 2 seconds until
the Gentle Wake duration time flashes on the display.
2. Press the – or + Button to adjust the Gentle Wake time from 15 seconds up to 120
seconds (or off).
3. Press and release the Wakeup/Alarm Skip Button. 2 beeps will confirm
gentle wake duration setting.
NOTE: The gentle wake duration does not effect the overall alarm cycle, which lasts for 1 hour.