Filter
Top Products
19
Anti-Theft System
This unit is equipped with a slide-down detachable and mask panel. Panel can be detached and taken with you, helping to deter theft.
Removing the panel
1.Press PWR button more than 2 seconds to switch off the power of the unit.
2.Press button to slide down the panel.
3.Pull out the left part of the panel a little, then pull out the panel from the right.
The panel will retract automatically.
Install the panel
1. Fit the panel into the slot of the unit.
2. Push in the front panel unit it clicks into plate.
3. Check the panel was fasten or not before you operation.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both L-Keys into hole in front of the set until they lock.
3. Pull out the unit.