Honeywell TE242ELW Portable Radio User Manual


 
WHAT DOES “PRE-AL” MEAN?
When temperature drops below freezing, programmable Ice Warning Alarm (PRE-AL)
automatically wakes you up earlier, giving an extra time to get ready.
It programmed to sound before the actual alarm if the remote temperature for Channel one (1) will
reach 32°F (0°C) and below. You can set this alarm to 15 to 90 minutes earlier than actual time
alarm.
Ice Warning Alarm (PRE-AL) can only be set if one or both - Weekday or Single alarm previously
programmed.
HOW DO I CHANGE A TEMPERATURE UNIT IN MY TE242ELW?
The temperature measurement unit (Cº or Fº) can be changed only through entering clock setting
procedure:
1. Press and hold MODE for 3 seconds - the year digit will flash.
2. Press MODE once - the month digit will flash. Press UP or DOWN arrow buttons to select the
month.
If correct month is displayed press MODE button once to confirm and move to the date mode
selection (date digit will flash)
3. Press UP or DOWN arrow buttons to select the date.
If correct date is displayed press MODE button once to confirm and move to the hour format
selection (“12” digits will flash)
.
4. Press UP or DOWN arrow buttons to select the 12 or 24 hour format.
If the correct hour format is displayed press MODE button once to confirm and move to the hour
selection (hour digits will flash)
5. Press UP or DOWN arrow buttons to select the hour
If correct hour is displayed press MODE button once to confirm and move to the minutes selection
(minutes digits will flash)
6. Press UP or DOWN arrow buttons to select the minutes
If correct minutes are displayed press MODE button once to confirm and move to the weekday
language selection (weekday language abbreviation “EN” will flash).
The weekday may be displayed in one of five languages-English, Spanish, French, German or
Italian.
7. Press UP or DOWN arrow buttons to select the weekday language:
EN” for English, “SP” for Spanish, “FR” for French, “GE” for German, and “IT” for Italian.
If correct language is displayed press MODE button once to confirm and move to the temperature
unit selection (“Fº” symbol for Fahrenheit will flash)