Filter
Top Products
Care and Servicing (Problems) - 41 -
set correctly?
VCR power turned off? Turn power off to activate the
timer.
Safety tab removed from Put cellophane tape over the
the videocassette? tab area, or use a
videocassette with the safety
tab intact.
Does not record Safety tab removed from Put cellophane tape over the when you
press the videocassette? tab area, or use a REC.
videocassette with the safety
tab intact.
TV program Loose or inappropriate Review hookup directions cannot be
viewed connections between and make correct, firm or
recorded. VCR and TV? connections.
Poor picture TV channel selector on Set TV to channel 3 or 4 as quality
("noise") the proper channel? correct for your area. (Set TV during playback.
to AUX or VIDEO if you
have a direct video hookup.)
Is TV correctly tuned? Fine tune the TV.
Static lines through the Press the tracking control
picture? buttons to adjust tracking.
"Noisy" picture despite Have video heads cleaned by
all previous adjustments, a qualified service technician.
even when playing
different cassettes?
No picture during TV set to the correct Set TV to channel 3 or 4.
playback. video viewing channel?
TV cannot be Is VCR remote control Follow instructions in operated by
the programmed for your Advanced Operations to VCR's remote
TV? program the remote to control.
send signals that your TV can
recognize. (Not all TV brands are
compatible.)
Is remote control set to Press the TV device button,
control the TV? then press the button
corresponding to the TV
function you want.
Mechanical Has a loaded cassette Nothing is wrong. The tape
sounds during the been stopped more than 5 protection mechanism is STOP mode.
minutes? working. Eject the