Filter
Top Products
ANTENNA/CABLE SYSTEM CONNECTIONS
21
See Indoor Antenna Diagram.
NOTE: The connection of an indoor antenna to a VCR may not always give acceptable TV
Reception.
USING A/V JACKS WITH TV/MONITOR (OPTIONAL)
If your TV has A/V input jacks, you may connect your VCR's AUDIO/VIDEO OUTPUT
jacks to the audio/video input jacks on back of your TV.
Direct audio/video connections usually result in a better picture and sound quality for
tape playback. Please see your TV's owner's manual for details.
Then, set your TV to the Video mode using VCR/TV button on your TV.
See A/V Jacks Diagram.
TO COPY A VIDEO TAPE
Connect the editing (recording) VCR, the source (playing) VCR and your TV using the
following diagram.
See Dubbing Diagram.
1. Insert a pre-recorded video cassette into the source (playing) VCR.
2. Insert a blank video cassette, or one you want to record over, into the editing
(recording) VCR cassette compartment.
3. Press TAPE SPEED button to select the desired recording speed (SLP, LP or SP) of
the editing (recording) VCR.
4. Select AUX position on the editing (recording) VCR. See page 15, under "Input
Select".
5. Press REC button on the editing (recording) VCR.