Filter
Top Products
25.
Main Power button/Enter(press and hold the button to operate Power, press to operate Enter)
26.
UP
27.
Previous/Left
28.
Down
29.
Volume +
30.
Volume -
31.
Next/right
32.
Play/Pause/Menu(press and hold the button to operate Menu, press to operate Play/Pause)
33.
Battery housing
34.
USB connector
35.
Audio transmitter
36.
Indicator of transmitter
37.
Connect button(Transmitter)
38.
Working indicator light (left satellite)
39.
Working indicator light (right satellite)
40.
Connect button(right satellite)
41.
Connect button(left satellite)
42.
Power button(Dock base)
Operation Guide
Set up
(The operation guide will refer to numbers per the unit diagram above.)
a.
Carefully remove all contents from the box.
b.
Plug the USB transmitter (audio dongle) into the back of the docking base (7)
c.
Plug the AC adapter jack into the back of the docking base (22), then plug the adapter into the AC
power outlet. The main unit power indicator light (14) will be illuminated red.
d.
Place the satellite speakers on the docking base. Indicator lights (12 & 13) will be blinking blue to
indicate charging status.
e.
From the docking base, turn the power on from the main power button (41). The main unit power
indicator light (14) will be turn blue.
f.
Turn on the satellite speakers (15 & 18) and turn the track switch (17 & 19) accordingly to the right and
left side.
g.
Press the hold the connect button (39 & 40) on the back of the satellite speakers until they both start
to beep. Then, press and hold the connect button (36) on the USB transmitter (audio dongle) until
you hear one continuous beep from each satellite speaker. This will indicate that the wireless satellite
speakers are now connected to the USB transmitter (audio dongle).
Note: When the wireless satellite speakers are successfully connected to the docking base for a few
seconds, the satellite speaker indicator lights (37 & 38) will show a solid blue light and the indicator light
(35) on the USB transmitter (audio dongle) will show a solid red light..
Playing music from your iPhone or iPod
a.
Once the wireless speaker unit is successfully set up, you can dock your iPhone or iPod by carefully
inserting the device into the iPhone or iPod connecter (5) on the docking base. This wireless speaker
dock will charge your iPhone or iPod and play music.
b.
You can use the remote control provided to operate the music on your iPhone or iPod and access the
menu on your iPhone or iPod. To access the menu, press and hold the Play/Pause/Menu button (31) on
the remote control. Use the directional buttons on the remote for navigation and accessing the menus.
The main power button on the remote control (24) acts as the enter button. When you press and hold