Filter
Top Products
Additional Features
29
UDP-89 User Manual Version 2.0 www.hhb.co.uk
Program Play
Sometimes it necessary to play individual items of programme
material on a disc in an order other than that in which they are
recorded. The UDP-89’s Program function permits the user to
program the order in which tracks (CD, SACD or DVD-A) or
chapters (DVD) are replayed. Up to 30 CD tracks or 12 DVD
chapters (or SACD tracks) may be sequenced in this way. The
programming method differs slightly for audio and video disc
types.
For DVDs and SACDs, the Program function is enabled by
pressing the PROGRAM button on the remote control unit. For
CDs, it is enabled via the OSD.
Note: It is not possible to enable the DVD/SACD Program
function from the UDP-89’s front panel.
Programming tracks on audio CDs
(and CD/DVD-ROMs containing MP3,
jpg or avi files)
Note: Track programming is performed using the on-screen
display, so a video monitor must be connected to the UDP-89 for
the Program function to be used.
The Program function can be selected from Stop or Play Modes.
Use the cursor keys to highlight the selections available on the
right of the screen
Program Edit Mode
Note that Edit mode is selected, indicated by the yellow border.
Press MARK/ENTER to confirm the selection. Navigate the
yellow border back to the tracklist with the cursor keys ,
and select the tracks to be played in the order that they are
required, pressing MARK/ENTER to select each one in turn;
a tick appears alongside each of the selected tracks. Navigate
the yellow border back to Add to Program, and press MARK/
ENTER. The tick marks next to the tracks will disappear.
By selecting the Program view option in a similar way, only
the tracks selected to be played will be displayed in the main
browser window, in the correct order. The Program view button
changes its legend to Browser view, and will toggle between the
two views.
00:02:15/00:02:45
-/3
Track02
Track05
Track01
Edit mode
Browser view
Clear program
Music Playing
PROGRAM VIEW mode
When in Program view, the Add to program button changes
to Clear program (see above). To delete tracks from the
programmed list, select the tracks to delete, pressing MARK/
ENTER on each in turn, then select Clear program. Track
deletion can only be conducted while the unit is in Stop Mode.
To play the programmed playlist, press PLAY. Note that the
tracks may be added to playlist even whilst it is playing. The track
number displayed on the front panel shows the track position in
the playlist, rather than the actual track number on disc.
Programming chapters on DVD-Video
and DVD-Audio, and tracks on SACD
Using the Program function with video discs generates a pop-
up window on the video image. Program can be selected from
STOP. Before programming a sequence of chapters, check the
programme material and make a note of the Title and Chapter
numbers required.
Pressing PROGRAM produces the on-screen display shown at (a)
below:
Play Mode
Mode : Program
Repeat: Off
h Play
1 --- ---
2 --- ---
3 --- ---
JJ
a) Program Screen
Play Mode
Mode : Program
Repeat: Off
h Play
2 T04 C05
3 T04 C03
4 --- ---
J
J
J
b) Enter Details
Play Mode
Repeat: Off
Clear Program
h
Play
1 T03 C06
2 T04 C05
3 T04 C03
J
c) Program Clear
Navigate the yellow border to the first pair of blank fields on the
right and enter the Title No. and Chapter No. of the disc item
which should be the first to be replayed (For SACD, only track
numbers need be entered; for DVD-A Group and Track numbers
are required). The subsequent items can be added in turn by
moving the yellow border down with the cursor keys and
entering the Title and Chapter (or track) numbers of each. Up
to 12 selections can be made, cursoring down from the lowest
visible will reveal further blank fields (see (b) above for example).
When the sequence has been programmed, playback can be
started by navigating the yellow border to Play, and pressing
MARK/ENTER.
The programmed sequence may be cleared by navigating to Play
and scrolling down when Clear program will be revealed. Press
MARK/ENTER to clear (see (c) above).
It is not possible to edit the program list during PLAY. Also, the
front panel will show the Title, Chapter, Group or track number
as they are on the disc, not with respect to their position in the
list.