Filter
Top Products
2222
SETTINGS
______________________________________________
Setting and storing radio stations ...
... with the automatic station search
When the device is first connected to the mains or the batteries are first
inserted, the device begins an automatic FM station search and stores the
first ten stations with strong signals on the preset buttons 1/6, 2/7, 3/8,
4/9, 5/10. In this process, preference is given to RDS stations. The follow-
ing appears in the display: »SEARCHING FM PLEASE WAIT«. You can stop the
search by pressing »MEMO.«.
After the search is completed, a demo program with the various RDS func-
tions starts in the display. This program can be interrupted by pressing any
key. The demo program can be re-started at any time by pressing and
holding down »DISPLAY« and can be ended by pressing any key.
However, you can also tune stations manually and store them on the preset
buttons.
... manual
1 Press »ON/OFF« to switch on the device.
– You will hear the radio station last selected.
2 Press »•FM •MW •LW •SW« (right side of device) to select the
wave band.
3 Keep pressing »TUNING DOWN
Ľ« or »TUNING UP Ń« until you
reach the frequency you want.
– Display: the frequency changes in 50 kHz steps (FM), 9 kHz steps
(MW) 1 kHz steps (LW) or 5 kHz steps (SW);
or
Press »TUNING DOWN Ľ« or »TUNING UP Ń« for approximately
one second.
– Display: the automatic search stops at the next station with a strong
signal.
4 Press »MEM0.« to activate the memory function.
– Display: »MEMORY« flashes.
Note:
If you do not press any button within 8 seconds, the device will quit
memory mode without making any changes.
5 Press the desired preset button »1/6, 2/7, 3/8, 4/9, 5/10« once
(preset stations 1 to 5) or twice (preset stations 6-10).
– Display: e.g. »4«, »MEMORY« flashes.
6 Press »MEMO.« again to store the station.
– Display: the frequency, »4« and »MEMORY«, then the station name.
w f
FANTASY
wPM TEXT f MEMORY
e ɷtљ
1
RDS FEATURE
w
FM
94.55
w f MEMORY
FM
100.60
w f MEMORY
FM
100.60 4
w f
ANTENNE
SEARCHING F