Filter
Top Products
5
Docking an iPod
MENU
An iPod nano or iPod shufe (2nd Generation) can be connected to the unit via the
headphone-type pin on the front of the unit.
To connect any other iPod, use the Line Input on the back of the unit.
Connecting an iPod using the Line Input requires a 3.5mm mini-phono cable (not
included).
Line Input
1. Plug one end of a 3.5 mm mini-phono cable (not included) into the Line Input on
the unit.
2. Plug the other end of the cable into the audio output/headphone output on an Mp3
Player or Other Audio Source.
3. Adjust the Power Switch to turn the unit on.
4. Audio played from the Mp3 Player or Other Audio Source will now be heard on
the unit.
If connecting to the headphone output of an audio source, the source’s volume
controls may need to be adjusted for optimal sound.