Filter
Top Products
6
Clock
CD and Radio
Setting the Clock Setting the Timer
1 Press the POWER button to turn the under cabinet
music system o.
2 Press and hold the PROG/CLKSET button for 3
seconds, then release.
“CLOCK SET” will begin blinking on the display.
3 Press the SKIP/SEARCH (�) button to adjust the
minute. Press the other SKIP/SEARCH () button to
adjust the hour.
4 Press the PROG/CLKSET button to nish setting the
time.
1 With the under cabinet music system turned o or
on, press the TIMER button repeatedly to adjust the
timer in increments of 10. (180max, 10min)
2 Press the SKIP/SEARCH buttons to adjust the timer
in increments of 1. (ie. 1-9 or 31-39)
3 After the set time has expired, the under cabinet
music system will sound an alarm.
4 To cancel the alarm after it has sounded, press the
POWER button.
5 To cancel the timer before the alarm has sounded,
press the TIMER button repeatedly until it is set to
“- -”.
Loading a CD
Playing a CD
1 Press the POWER button to turn the under cabinet
music system on.
2 Press the SOURCE button to switch to CD MODE.
CD MODE is indicated on the display by two blinking
dashes “ - -”, and eventually track numbers.
3 Press the OPEN/CLOSE button to open the CD
drawer.
4 Load a CD into the CD drawer, label side facing up.
1 Follow the instructions for LOADING A CD.
2 After the power is on, the music system is in CD
MODE, and the CD is loaded, press the PLAY/PAUSE
button to begin playing a loaded CD.
Programming a CD
1 Follow the instructions for LOADING A CD.
2 After the power is on, the music system is in CD
MODE, and the CD is loaded, press the STOP button.
3 Press the PROG/CLKSET button.
“01”, indicating the current program track, will begin
ashing on the display.
4 Press the SKIP/SEARCH buttons to select the CD
track you would like to play in the program.
5 Press the PROG/CLKSET button.
6 Repeat steps 3, 4, and 5 to continue programming
CD tracks.
Up to 20 tracks can be programmed.
7 Press the PLAY/PAUSE button to begin playing the
programmed CD.
8 To cancel a program, press the STOP button twice.
Playing the Radio
1 Press the POWER button to turn the under cabinet
music system on.
2 Press the SOURCE button to switch to RADIO MODE.
RADIO MODE is indicated by “AM” or “FM” on the
display.
3 Press the STOP button to switch between AM and
FM radio.
4 Turn the TUNING dial on the side of the under
cabinet music system to tune the AM or FM radio.