Filter
Top Products
Setting the Alarm
1. With the radio o, press and hold the AL1 or AL2 buttons to
set the time for Alarm 1 or Alarm 2.
2. The screen will ash and display the time the alarm is set to
go o. Press the Hour and Minute buttons to change the
desired time. Note the PM indicator.
3. With the screen still ashing, press the AL1 or AL2 buttons
again to set the weekly alarm schedule.
1-7 rings Mon-Sun | 1-5 rings Mon-Fri | 6-7 rings Sat-Sun
SETTING THE CLOCK
ALARM
RADIO
Auto
When the unit is plugged in, the correct time will be displayed
after a few seconds.
Manual
1. Press and hold the Clock button until the display
begins ashing.
2. Press the Hour and Minute buttons to adjust the time. The
PM indicator will light when the hour is set in the PM.
3. Press the Clock button again set the day of the week. Press
the Hour and Minute button to adjust the day from 1 to 7.
Example: 1 - Monday, 2 - Tuesday, etc.
4. Press the Clock button again to nish, or wait for the display
to stop ashing.
Daylight Savings Time
On the rear of the unit is a switch marked DST ON/OFF.
In the ON position, the time on the clock is moved ahead
one hour. In the OFF position, it is moved back one hour.
Snooze and Alarm Reset
After the alarm sounds, press the Snooze button to delay the alarm
for an additional 9 minutes, or press the Power button to turn the
alarm o until the set alarm time is reached again.
Radio Reception
Adjust the position of the FM Antenna to improve FM radio
reception. An AM antenna is built into the clock radio. To improve
AM radio reception, adjust the position of the clock radio.
Tuning the AM or FM Radio
1. Power on the radio by pressing the Power button. Press it
again to switch between the AM and FM radio mode.
2. Press the Tunning ± buttons to nd the desired
radio frequency.
3. Press the Volume ± buttons to adjust the volume
of the radio.
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais,
espagnol ou français, ou pour obtenir des réponses à
des questions fréquemment posées, consultez la rubrique
d’assistance sur: www.gpx.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.gpx.com
INTERNATIONAL SUPPORT
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.
Time Zone
When the unit is rst powered on, it is automatically set to Time
Zone 2 - Eastern Standard Time. To change this setting, press the
Time Zone button to select the desired time zone.
1 Atlantic Std Time UTC- 4 hrs
2 Eastern Std Time UTC- 5 hrs
3 Central Std Time UTC- 6 hrs
4 Mountain Std Time UTC- 7 hrs
5 Pacic Std Time UTC- 8 hrs
6 Alaska Std Time UTC- 9 hrs
7 Hawaii - Aleutian Std Time UTC- 10 hrs
4. After the alarm is set and the screen has stopped ashing,
press the AL1 or AL2 buttons again to select how the alarm
will sound with the Buzzer or the Radio. Press once more to
deactivate the alarm entirely.
Battery Backup
The battery backup is intended for short power outages only.
The clock radio’s primary functions cannot run o of the battery
backup alone. This unit uses a button cell battery that will last up
to 1 year and maintains the time. Replace the battery if the low
battery indicator lights up.
RELEASE
CR2032
CR2032 Button Cell
Battery (included)
Bottom View
Saving a Station as a Preset
1. With the radio on, tune to your desired frequency, press and
hold the Preset button until the screen ashes.
2. Press the Tunning ± buttons to choose the desired preset
station, 1 though 10.
3. Press the Preset/Clock button again to set the frequency to
that preset station.
4. The unit will store 10 FM and 10 AM radio station presets.
Once set, press the Preset/Clock button to cycle through
your preset stations.