GPX C222B Clock Radio User Manual


  Open as PDF
of 2
 
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com Customer Service: 1-888-999-4215
Copyright © 2011 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
1. If in radio mode, press and hold the
Power/Source button to turn the unit off.
2. Press and hold the Clock/Membutton
until the display begins to blink, then
release the button.
3. Press the Hourbutton to adjust the hour.
The PM indicator will light when the hour
is set in the PM.
4. Press the Minbutton to adjust the minute.
5. Press the Clock/Mem button to nish
setting the time.
1. If in radio mode, press the Power/Source
button to turn the unit off.
2. Press and hold the Al1 or Al2 button until
the display begins to blink, then release
the button.
3. Press the Hourbutton to adjust the hour.
The PM indicator will light when the hour
is set in the PM.
4. Press the Minbutton to adjust the minute.
The light will come on.
5. Press the Al1 orAl2 buttons to switch
between Radio and Buzzer.
If the alarm is set to Radio, use the Vol+/-
buttons to adjust the volume of the alarm.
6. Once the set alarm time is reached, the
alarm will sound.
To set the other alarm, follow the above
steps and choose the alarm not currently
set.
1. Press the Power/Source button to turn
the clock radio on.
2. Press the Power/Sourcebutton again
to switch between the AM and FM radio
mode.
3. Press the Tun+andTun-buttons to adjust
the radio to the desired frequency.
4. Press and hold the Tun+andTun-buttons
to search for the next available frequency.
5. Press the Vol+/- buttons to adjust the
volume.
6. Press and hold the Power/Sourceto turn
the radio off.
Clock and Sleep Timer Alarm Radio
Setting the Clock
1. If in radio mode, press and hold the
Power/Source button to turn the unit off.
2. Press the Snooze/Sleep button
repeatedly to set the sleep timer ( 90, 80,
70, 60, 50, 40, 30, 20, 10 min or OFF ).
3. Once the set sleep time has expired the
clock radio will automatically power off.
Setting the Sleep Timer
Setting the Alarm
1. Follow the instructions for Setting the
Alarm.
2. Press the Al1 or Al2 buttons repeatedly
until the indicator is no longer lit.
Cancelling the Alarm
After the alarm sounds:
Press the Snooze/Sleep button to delay the
alarm for an additional 9 minutes.
OR
Press the Power button to turn the alarm off
until the set alarm time is reached again.
Snooze and Alarm Reset
Tuning the AM or FM Radio
1. Follow the instructions for Tuning the AM
or FM Radio.
2. Tune to the desired station.
3. Press the Clock/Mem button to save the
current radio station as a preset.
Saving a Station as a Preset
1. Follow the instructions for Tuning the
Radio and Saving a Station as a Preset.
2. Press the Clock/Membutton to cycle
through preset radio stations.
Tuning to a Preset Radio Station
Adjust the position of the FMAntenna to
improve FM radio reception.
An AM antenna is built into the clock radio. To
improve AM radio reception, adjust the position
of the clock radio.
Radio Reception
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently
asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes,
visite la sección de apoyo en
www.gpx.com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur
www.gpx.com
International Support
 previous