GPX C209B Clock Radio User Manual


  Open as PDF
of 2
 
SETTING THE CLOCK
OPERATIONS CONTROLS
CONTROL GLOSSARY
SETTING THE ALARM █
Press and hold the 1. AL Button.
While holding the 2. AL Button, press the HR Button to
adjust the hour, and the MIN Button to adjust the minute.
A PM Indicator Light will illuminate green when the time is
in the PM.
While continuing to hold the 3. AL Button, press the AL
Mode Button to set the alarm mode to BU (Buzzer), RU
(Radio), or Off.
After the correct time is set, release the 4. AL Button tonish
setting the alarm.
After the alarm sounds, press the • Snooze Button to delay
the alarm for an additional 9 minutes.
After the alarm sounds, press the • Power/AL Off Button to
turn the alarm off until the set alarm time is reached again.
SETTING THE SLEEP TIMER █
Press and hold the 1. Sleep Button.
While holding the 2. Sleep Button, press the HR Button
to increase the hour, and the MIN Button to decrease the
minutes.
The maximum sleep time is 1 hour 59 minutes.
After the sleep time is set, release the 3. Sleep Buttontonish
setting the sleep timer.
At anytime, you can check the remaining sleep time by
pressing and holding the SleepButton.
TUNING THE AM/FM RADIO █
Press the 1. Power/AL Off Button to turn the radio on.
Turn the volume up to see if the unit is turned on or off. If
static or the radio plays, then the unit is turned on, if not,
then the unit is powered off.
Adjust the 2. FM/AM Switch to AM or FM.
Turn the 3. Tuning Dial to the desired station.
Turn the • Volume Dial adjust the volume of the unit.
To set the sleep timer when in • Radio Mode, follow the
“Setting the Sleep Timer” instructions.
WhentheAuxiliaryInputisconnectedtoanAudioSource,•
that source will override the radio.
USING THE AUXILIARY INPUT █
Plug an MP3 Player or other Audio Source into the 1.
Auxiliary Input on the back of the unit.
Press the 2. Power/AL Off Button to turn the unit on.
Turn the volume up to see if the unit is turned on or off. If
static, the radio, or the connected audio source plays, then
the unit is turned on, if not, then the unit is powered off.
WhentheAuxiliaryInputisconnectedtoanAudioSource,•
that source will override the radio.
Abbr. Full Name Time Zone
A-1
AST Atlantic Standard Time UTC - 4 hours
ADT Atlantic Daylight Time UTC - 3 hours
A-2
EST Estern Standard Time UTC - 5 hours
EDT Eastern Daylight Time UTC - 4 hours
A-3
CST Central Standard Time UTC - 6 hours
CDT Central Daylight Time UTC - 5 hours
A-4
MST Mountain Standard Time UTC - 7 hours
MDT Mountain Daylight Time UTC - 6 hours
A-5
PST PacicStandardTime UTC - 8 hours
PDT PacicDaylightTime UTC - 7 hours
A-6
AKST Alaska Standard Time UTC - 9 hours
AKDT Alaska Daylight Time UTC - 8 hours
A-7
HAST Hawaii-Aleutian Standard Time UTC - 10 hours
HADT Hawaii-Aleutian Daylight Time UTC - 9 hours
SETTING THE CLOCK USING INTELL SET™ █
Plug the attached AC Cord into an AC power source.1.
The time will automatically be set to Eastern Standard Time.2.
Press and hold the 3. Time Zone Button, located on the back of the unit.
While holding the 4. Time Zone Button, press the MIN Button to adjust the current time zone.
Refer to the Time Zone Chart to nd your specic time zone.
MANUALLY SETTING THE CLOCK █
Press and hold the 1. Time Button.
While holding the 2. Time Button, press the HR Button to adjust the hour, and the MIN Button to
adjust the minute.
A PM Indicator Light will illuminate green when the time is in the PM.
After the correct time is set, release the 3. Time Button tonishsettingtheclock.
2
1
3
4
8
10
9
6
7
5
11
12
13
14
17
16
15
Sleep Button01.
Press the Sleep Button to adjust the sleep timer.
Power/AL Off Button02.
Press the Power Button to turn the unit on.
After the alarm sounds, press the Power/AL Off Button to
turn the alarm off until the set alarm time is reached again
Volume Dial03.
Turn the Volume Dial to adjust the volume of the unit.
Time Button04.
Press the Time Button to adjust the unit’s time.
HR Button05.
Press the HR Button to adjust the hour of the time or alarm.
Snooze Button06.
After the alarm sounds, press the Snooze Button to delay the
alarm for an additional 9 minutes.
MIN Button07.
Press the MIN Button to adjust the minute of the time or
alarm.
While holding the Time Zone Button, press the MIN
Button to adjust the current time zone.
FM/AM Switch08.
Adjust the FM/AM Switch to select FM or AM radio.
Time Zone Button09.
Press the Time Zone Button to adjust the time zone.
Auxiliary Input10.
UsetheAuxiliaryInputtoconnectanMP3playerorother
audio source to the unit.
Dimmer Button11.
Press the Dimmer Button to adjust the brightness of the
LED display
AL Button12.
Press the AL Button to set the alarm time.
Tuning Dial13.
Turn the Tuning Dial to adjust the FM or AM radio station.
AL Mode Button14.
Press the AL Mode Button to set the alarm mode to BU
(Buzzer), RU (Radio), or Off.
DST Switch15.
Adjust the DST Switch to “On” during Daylight Savings
Time to adjust the clock forward an hour.
Adjust the DST Switch to “Off” at the end of Daylight
Savings Time to adjust the clock back an hour.
FM Wire Antenna16.
Adjust the FM Wire Antenna to improve the FM radio
reception.
An AM Antenna is built into the unit. Adjust the position of
the unit to improve AM radio reception.
AC Cord17.
Use the attached AC Cord to connect the unit to an AC
power source.
C209.indd 2 3/13/2009 12:12:48 AM
 previous