Genius Vero 1 Clock Radio User Manual


 
Page 4/16
2 Safety Instructions – PLEASE READ CAREFULLY
DO NOT use your VERO-1 near water
DO NOT allow your VERO-1 to get wet
DO NOT use the VERO-1 near heat sources
Ensure that cables are NOT positioned in a manner in which they may suffer
abrasion, be walked on or trapped.
DO NOT remove any screws or open the casing of the product
ONLY use the supplied power adapter
DO NOT cover the ventilation slots on the VERO-1 *
DO NOT place anything in the ventilation slots of the VERO-1
Fit the mains adaptor to an easily accessible socket, located near the radio
* Your GEO-1 should be positioned to ensure good ventilation so that it will not
overheat. It is recommended to allow a minimum of 5cm free space around it
when choosing its location
2.1 Cleaning
UNPLUG your VERO-1 before you clean it
DO NOT use a liquid or aerosol cleaner
DO NOT use an abrasive cleaning product
Clean your VERO-1 ONLY using a soft damp (not wet) cloth
2.2 Servicing
DO NOT attempt to repair any part of your VERO-1
Contact your dealer if you have any doubt or questions regarding the
installation or operation of your VERO-1