Filter
Top Products
Genesis Advanced Technologies 201 System
Frequency Response 16Hz to 36kHz, ± 3dB
Sensitivity 90 dB 1 watt 1 meter
Maximum/Minimum Tube Power 500/70 watts per side
Maximum/Minimum Solid State Power 750/70 watts per side
Input Impedance 4 ohms (nominal)
HF Transducers (per side) fi fteen Genesis 1” Ribbon Tweeters
Midrange Transducer (per side) 48” Genesis Ribbon
LF Transducers (per side) eight 8” cast-frame
metal-cone woofers
Amplifi er Controls Phase, Gain, Low-pass, High-pass
Speaker Controls Rear Tweeters (± 1 dB)
Upper Midrange Contour (± 0.75 dB)
LF Amplifi er Power Rating 4 x 400 watts RMS
Amplifi er Inputs Stereo XLR (balanced), Stereo RCA
Amplifi er Input Impedance 33K ohms
Mid/Tweeter Panel Dimensions H 72” x W 13.5” x D 9.75”
Woofer Tower Dimensions H 72” x W 11” x D 22”
Amplifi er Dimensions H 10” x W 12” x D 19”
Mid/Tweeter & Woofer Tower Weight 650 lbs (295 kg)
Amplifi er Weight 70 lbs (32 kg)
Finish Rosewood
4407 6th Ave. NW • Seattle, WA 98107 USA • 206.789.3400 • www.genesisloudspeakers.com
201
T
he Genesis 201 is a fl oor standing,
four-piece loudspeaker system featur-
ing a pair of dipole midrange/tweeter pan-
els and two bi-polar woofer towers. Each
midrange/tweeter panel consists of a 48-
inch midrange ribbon, twelve front-fi ring
and three rear-fi ring 1-inch planar ribbon
tweeters. Each woofer tower contains eight
cast-frame, metal-cone woofers driven by
an 800-watt remote controlled Servo Am-
plifi er. All the transducers in this unique,
state-of-the-art system have been
designed to be a nearly perfect piston
within its useable frequency band.
The 1-inch planar ribbon tweeter,
described by the audiophile press as pos-
sibly “the world’s best,” is hand-crafted
from an 0.0005 inch thick laminated membrane of
aluminum and Kapton. The extremely low mass of
the tweeter’s diaphragm means that this driver has a
frequency response considerably beyond the hu-
man hearing range.
Genesis 201’s midrange transducer is single-
piece, planar ribbon driver constructed of a very
thin layer of aluminum laminated to a 0.001 inch
thick Mylar substrate and surrounded by over 24
feet of barium ferrite magnets.
An active 1600-watt servo feedback system,
employing acceler-
ometers as sensors,
lowers the woofer
distortion by a fac-
tor of 10 compared
to its open loop
response. This re-
sults in the 201 low
frequency system
having lower distortion
and faster response
time than convention-
al designs.
Please visit our web
site for compete data
on the 201 System.
©2003 Genesis Advanced Technologies All specifications subject to change
A4_201-350-6p1Bro.IDD 2 12/19/02, 10:15:52 PM