Filter
Top Products
FINAL SOUND 300i Loudspeaker Manual vs. 1.3 -US- c FS 2007RJ 3
.
1. Congratulations
Congratulations on your purchase of a Final Sound flat-panel loudspeaker system.
You have invested in the finest instrument for audio reproduction available. The Final Sound product
line consists of front- and rear flat-panel loudspeakers, center loudspeakers and subwoofers.
The product line is based on a unique modular system. Final Sound offers you the possibility to start
buying a stereo system and easily extend this at any convenient time into a complete Final Sound
Home Theatre system. You can do this just by adding a center loudspeaker and/or another set of Final
Sound flat-panel loudspeakers.
The Final product line is designed to surpass the performance of other existing loudspeakers and
contains some of the most elegant and sophisticated designs ever used for music reproduction.
Our flat-panel loudspeakers are capable of producing very pure and accurate sound due to their ultra
low mass diaphragm. The Final Sound technology has evolved through many years of research and
development.
The Final Sound subwoofers are designed to match perfectly with the characteristics of the Final
Sound loudspeaker panels.
The Model F300i loudspeakers are designed for the use in a stereo setting or a so-called 5.1 home
theatre configuration.
The Model F300i flat-panel loudspeakers are floor-standing loudspeakers. However, Final Sound
provides a wall mountable version of the 300i panel.
300i-based stereo system
The Final Sound Model F300i stereo system consists of the following components:
2 F300i Final Sound flat-panel loudspeakers (left and right channel).
The F300i does not reproduce frequencies below 95Hz. Therefore it is very important
that a subwoofer, such as our S110 or S220 (purchased separately), that can
reproduce the lower frequencies be used.
300i-based home theatre system
It is simple to build a 300i-based home theatre system with the following components:
4 F300i Final Sound flat-panel loudspeakers (left, right and surround channels).
A Final Sound center panel (150i or 400i).
A subwoofer (S110 or S220).
300i-based virtual surround system
2 F300i Final Sound flat-panel loudspeakers (left and right).
A Final Sound virtual surround receiver.
A subwoofer (S110 or S220).
Manual contents
This manual includes the instructions for the Final 300i, the Final 300i wall mountable panels and
basic information about the Final subwoofer.
Please read and follow these instructions carefully before you connect your Final Sound system to
your amplifier. These instructions are very important and will prevent you from experiencing any delay
or system damage, which might occur in a trial and error situation.
The Final Sound loudspeaker system consists of separate products, which can function individually or
perform as a complete system.