Filter
Top Products
17
SOLARLINKFR600RDS OWNER’S MANUAL
4) Press <SELECT> shortly once to enter the alert mode setting mode.
5) Press <> or <> shortly to select the alert mode (SIREN & VOICE).
Note: The selected alert mode will appear in the display.
6) After setting, press <SELECT> shortly to save.
SETTING COUNTY CODES (CLC CODES IN CANADA)
County code setting is described below.
A county code instructs the radio only to receive an ALERT when
the code is programmed in. Look up a United States county code at
the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/
index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be
set to receive ALL coded information sent from any transmitter, if
your within range. When you set codes, it will only pick up alerts
when you’re in that county or within reception distance of the signal.
To set codes:
1) Revolve the <Band Selecting Knob> to the “OFF” position.
2) Press the <MENU> button shortly to enter the setting menu.
3) Press or shortly to select the “COUNTY CODE” option.