Filter
Top Products
SOLARLINK FR600 OWNER’S MANUAL
16
4) Press <SELECT> shortly once to enter the alert mode
setting mode.
5) Press <> or <> shortly to select the alert mode (SIREN
& VOICE).
Note: The selected alert mode will appear in the display.
6) After setting, press <SELECT> shortly to save.
SETTING COUNTY CODES (CLC CODES IN CANADA)
County code setting is described below.
A county code instructs the radio only to receive an ALERT
when the code is programmed in. Look up a United States
county code at the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/
index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or
can be set to receive ALL coded information sent from any
transmitter, if your within range. When you set codes, it will
only pick up alerts when you’re in that county or within
reception distance of the signal.
To set codes:
1) Revolve the <Band Selecting Knob> to the “OFF”
position.
2) Press the <MENU> button shortly to enter the setting
menu.