Filter
Top Products
1.
Press and hold the Emergency key for the programmed duration. If
programmed, an "E" will replace the 10’s digit in the System field and
a alert tone will sound.
2.
The radio transmits an emergency message until an Emergency
Channel Assignment is received.
3.
Upon receipt, the radio begins operation on the programmed Sys-
tem/Group (see the
Home/Emergency Key Definitions section
above).
4.
Press the PTT bar and speak directly into the microphone in a normal
voice.
5.
Release the PTT bar when the transmission is complete and listen for
a reply.
HOME
The radio can be programmed to automatically switch to a home
System and/or Group by pressing and holding the Home/Emergency key for
the programmed duration. The radio will also transmit an emergency mes-
sage on the home System and/or Group if programmed (see the EMER-
GENCY OPERATION section).
KEYPAD LOCK (SYSTEM Model Only)
The keypad can be locked at any time to prevent undesired key
presses. To lock the keypad when it is in the unlocked state, press and
release the
LOCK (shifted 0) key. All buttons and keys except the VOLUME,
PTT, HOME/EMER, SHIFT/CLR and
LOCK (shifted 0) will now be inhibited.
If the Emergency function of the HOME/EMER key is disabled, the
The radio may be programmed for both
Quiet and/or Blind mode
in which case no alert tone is heard and/or the display does not
change respectively. If programmed to display an "E", the radio’s
display will return to normal operation once the PTT is pressed.
NOTE
39