Filter
Top Products
owners manual Audissey APS 5+2
4
FEATURES AND BENEFITS
Built in Powered Subwoofer
In addition to the advantages of full range ASSYMETRICAL sound reproduction, the twin
150-watt subwoofer sections produce the deep, powerful bass extension only a high
quality powered subwoofer can create in a compact speaker of this size. This integrated
design, with pre-set calibration, ensures seamless blending between low, mid and high
frequencies. It also means your APS 5+2 needs a minimum of space and set-up
requirements in your home. All operating controls are conveniently located on the
amplifier panel which is on the rear of your loudspeaker cabinet.
Auto-on/Auto-off
The subwoofer section of the APS 5+2 is equipped with a special “Auto-on/Auto-off”
circuit. This circuit automatically turns the subwoofer section on as soon as it senses a
signal.At a predetermined time after the program signal ends, this circuit
automatically turns the subwoofer amplifier to “standby”.
Clipping Protection
Many powered subwoofers on the market today produce distorted sounds as a result
of clipping at high input levels.
ENERGY’s proprietary Clipping Protection Circuit (CPC)
continuously senses the input signal level and automatically adjusts to prevent unwanted
clipping of the waveform, maintaining undistorted bass reproduction.
Low Level RCA Input Jack
The RCA Input jack allows you to connect the subwoofer section of the APS 5+2 to
EITHER: 1) The subwoofer mono output of an A/V Receiver/Processor or
2) The output of a Pre-Amp or A/V Processor when used with
an external power amplifier.
3) The subwoofer output of an External Crossover.