Filter
Top Products
12
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.
1.) Move the FUNCTION selector to CD, insert your disc in the player, close the
door, and wait until the total track number appears in the display.
2.) Press the CD PROGRAM button once. The Program Indicator
flashes and program memory “01” begins flashing in the
display.
3.) Use the SKIP/SEARCH / buttons to select the first
track to be programmed. (Example: Track 8).
4.) When track number “8” appears in the display, press the
PROGRAM button once again to enter the track “8” in
program memory number “01”. Track number “8” disappears
and program memory number “02” begins flashing in the
display, indicating that you may now select a track to be
entered in program memory number “02”.
5.) Use the SKIP/SEARCH / buttons to select the next track to be
programmed. When the desired track number appears in the display press the
PROGRAM button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the
program memory. When the memory is full, the LED display
shows the programmed tracks 1-20 in sequence, then “0 1”
indicator flashes.
7.) To begin programmed playback press the PLAY/PAUSE
button. The LED display will show the first programmed track
and playback will begin on that track. The Program Indicator
lights.
SB280_033104.p65 31/3/2004, 10:4512