Filter
Top Products
4
PREPARATION FOR USE
UNPACKING AND SET UP
• Carefully remove the main unit and the AC power cord from the display
carton. Remove all the packing material from the unit. Remove any
decorative or descriptive labels from the front or top of the cabinet. Do
not remove any labels from the back or bottom of the cabinet.
• Carefully remove any small strips of tape that may have been used to
prevent the CD door from opening in transit.
• Unwind the AC power cord and extend it to its full length.
• This unit was shipped with a dummy CD transit card in the CD player.
This dummy CD prevents the laser pick up from moving during
shipment. This card must be removed before you can insert your own
CDs. Press on the indented area of the CD door to open it. Carefully
remove the dummy CD from the player and discard it. Close the CD
door.
• Place the unit on a flat, level surface such as a table, desk, counter,
shelf, etc, convenient to a 120V 60 Hz AC outlet, out of direct sunlight,
and away from sources of excess heat, dust, moisture, or strong
magnetic fields.
SB250A_011205.p65 12/1/2005, 17:254