Emerson SB225 Portable Stereo System User Manual


 
5
POWER SOURCES
AC:
Unwind the AC cord and extend it to its full
length. Insert the small end of the AC cord
into the AC socket on the side of the unit.
Insert the other end of the AC cord into any
convenient 120V AC, 60Hz household outlet.
NOTE: The AC plug supplied with the unit is
polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into
a nonpolarized AC outlet, do not file or cut the wide blade. It is the user’s responsibility
to have an electrician replace the obsolete outlet.
DC:
Remove the Battery Compartment cover on the bottom of the unit by pressing down the
two tabs and insert eight (8) “C” cell batteries (not included), observing the battery
polarity indicated inside the compartment. Replace the Battery Compartment cover.
AC Plug
AC Outlet
+ + +
+ + +
+ +
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or
old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions.)