Filter
Top Products
21
Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
NOTE: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP/BAND button to stop playback before you begin the programming
steps below.
1.) Press the “FUNCTION” button to select the CD mode, insert your disc in the
player, close the door, and wait until the total track number appears in the
display.
2.) Press the PROGRAM button on front panel or PROG./MEMORY button on
the remote control once. The MEMORY indicator begins flashing in the display.
“P01” appears briefly then “00” flashes.
3.) Press the or button to select the first trackck
to be programmed.
Example: Track 08.
4.) Press the PROGRAM button on front panel or PROG./MEMORY button on
the remote control to enter the track “08” in program memory number “P01”.
“P02” appears briefly then “00” flashes again in the display, indicating that you
may now select a track to be entered in program memory number “P02”.
5.) Press the or buttons to select the next track to be programmed.
When the desired track number flashes in the display press the PROGRAM
button on front panel or PROG./MEMORY button on the remote control again
to enter that track in the program memory.
PD6559.60_B102306.p65 23/10/2006, 10:1421