Emerson PD6537 Portable CD Player User Manual


 
14
MAKING A TAPE RECORDING
This model allows you to make tape recordings directly from the CD player, or the
radio.
Refer to PLAYING COMPACT DISCS if necessary to operate the CD player.
Refer to LISTENING TO THE RADIO if necessary to tune in the station you
wish to record from radio.
1.) Press the STOP /EJECT key to open the cassette door..
2.) Insert a good quality blank cassette tape into the slots on the cassette door with
the open end facing up and the full reel on the right. Use normal tape only. Do
not use tape identified as CrO2 (Chrome) or Metal tape formulations. For
best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute or
120 minute tapes as these thinner tapes are more likely to jam in the mechanism.
3.) Close the cassette door.
4.) When you are ready to start recording press the RECORD key. The PLAYY
key will also engage. The CD you are playing, or radio program you selected
will be recorded directly on to the tape.
5.) Press the PAUSE key during recording to stop the tape temporarily and
avoid recording unwanted material such as radio commercials.
6.) When you have finished recording press the STOP /EJECT key to stop
and remove the tape.
BEAT CUT SWITCH (On Left Side Cabinet)
Occasionally when recording from the AM radio a repetitive whistle or beat sound
may be heard. If this occurs slide the BEAT CUT switch to its other position to
eliminate the unwanted sound.
Automatic Recording Volume Level Control
This unit has an Automatic Level Control (ALC) circuit which controls the recording
volume level and prevents overloaded and distorted recordings. The VOLUME
control has no effect on recording volume level. You may change the VOLUME
control setting during the recording or even reduce the volume level to Minimum.
This will not effect the level of the recording.
PD6537_ib011303.p65 13/1/2003, 14:4814