Emerson PD5202 Portable CD Player User Manual


 
10
PLAYING COMPACT DISCS
NOTE: Although this portable CD player can read CD-R and CD-RW discs, in
addition to normal CDs, the playability of CD-R and CD-RW discs may be effected
by the type of software that was used to create the discs, as well as the quality and
condition of the blank media you are using. 100% playability cannot be guaranteed.
This is not an indication of a problem with the player.
NORMAL PLAYBACK
1.) Move the FUNCTION selector to the CD position.
2.) Open the CD door by pressing at CD door OPEN/CLOSE position. If you have
not already removed the white transit card from the CD player, please remove
it now.
3.) Place your CD on the center spindle with the printed
label side facing up. Close the CD door. The player
will read the Table of Contents and the display will
show the total number of tracks on the disc. If the
disc is damaged or up side down, display shows
4.) Press the CD PLAY/PAUSE button to begin
playback on Track 1. The PLAY Indicator appears
in the display .
To skip to higher or lower numbered tracks during playback press the SKIP
FWD or SKIP REV button repeatedly until the desired track number
appears in the display. Playback will begin on the selected track.
To search rapidly forward or backward during playback to locate a specific
portion of a track, depress and hold the SKIP FWD or SKIP REV button.
The player will search rapidly forward or backward as long as the buttons are
depressed. Normal speed playback will resume when the buttons are released.
To Pause momentarily during playback press the PLAY/PAUSE button
again. The sound stops and the PLAY Indicator
flashes, however the disc continues to spin. To
cancel Pause and resume normal playback press
the PLAY/PAUSE button once more. Normal
playback resumes and the PLAY Indicator stops flashing.
5.) Adjust the VOLUME control as desired.
PD5202_ib103003.p65 30/10/2003, 10:0110