Filter
Top Products
25
About Cassette Tapes
Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs
for each side of the tape. If the erase prevention tab for side A is removed, you
cannot accidentally record on side A. The record key cannot be depressed if the
erase prevention tab on the cassette has been removed.
To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for side A. This prevents the
record key from locking.
If later you do wish to record on side A of the cassette, cover the tab opening with
a piece of cellophane tape. This will allow the record key to function again.
COVER OPENING WITH TAPE
IN ORDER TO RECORD AGAIN.
TAB FOR SIDE A
BREAK OUT TO PREVENT RECORDING
CARE AND MAINTENANCE
PD3812_B032305.p65 23/3/2005, 15:0225