Emerson PD3812BK Portable CD Player User Manual


 
18
Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP/BAND button to stop playback before you begin the programming
steps below.
1.) Press the FUNCTION button to select the CD mode, insert your disc in the
player, close the door, and wait until the total track number appears in the
display.
2.) Press the CLOCK/MEMORY/AUTO PRESET button once. The MEMORY
indicator begins flashing in the display. P 0 1 appears briefly then 0 0 flashes.
3.) Press the or button to select the first
track to be programmed.
Example: Track 08.
4.) Press the CLOCK/MEMORY/AUTO PRESET button once again to enter the
track 08 in program memory number P 0 1.
P 0 2 appears briefly then 0 0 flashes again in the display, indicating that you
may now select a track to be entered in program memory number 02.
5.) Press the or buttons to select the next track to be programmed.
When the desired track number flashes in the display press the CLOCK/
MEMORY/AUTO PRESET button again to enter that track in the program
memory.
PD3812_B032305.p65 23/3/2005, 15:0218