Filter
Top Products
12
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.
1.) Move the FUNCTION selector to CD, insert your disc in the player, close the
door, and wait until the total track number appears in the display.
2.) Press the PROG. button once. The PROG. Indicator and
program memory “0” begin flashing in the display.
3.) Use the / buttons to select the first track to be
programmed. (Example: Track 8).
4.) When track number “8” flashes in the display, press the
PROG. button once again to enter the track “8” in program
memory number “01”. Track number “8” disappears and
“0” flashes again in the display, indicating that you may
now select a track to be entered in program memory
number “02”.
5.) Use the or buttons to select the next track to be programmed. When
the desired track number appears in the display press the PROG. button again
to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks
in the program memory. When the memory is full, the
“– –” and PROG. indicator flash.
PROG.
PROG.
PROG.
PROG.
PD1710_010504.p65 5/1/2004, 15:5512