Filter
Top Products
2
Insert the battery (not included)
1. Slide the battery compartment cover as shown.
2. Insert one fresh "AAA" alkaline battery in the battery
compartment. Be sure to follow the polarity marking in
the battery compartment. If the battery is inserted
incorrectly the unit will not work.
3. Slide the battery compartment into place.
• When the battery is getting weak, the indicator changes
from " " (full battery) to " " (replace battery) in the
display, the battery is almost exhausted and should be
changed as soon as possible. Do not leave weak or
exhausted battery in the player as it will eventually leak
and cause corrosion inside the battery compartment.
1
Unpack box contents
3
Connect player to your computer
1. Remove cap.
2. Place USB connector of player into female side of the
USB extension cord (A). Plug the other end of the
extension cord (B) into an open USB port in computer.
NOTE: Player can be connected directly to computer if
space permits.
5
Use your MP120/MP320 as a MP3 player
1. Unplug player from the USB cord. Make sure you have at
least one MP3 or WMA™ file already stored on the player.
2. Make sure the HOLD switch is in the off position (A) and
that the player is on (B).
3. Connect the earbuds to the headphone jack.
4. Press the POWER/PLAY/PAUSE/STOP button to begin
playing an audio track.
6
How to operate your player
4
Transferring music and data files
2
Power on the unit: Press and hold the POWER/PLAY/
PAUSE/STOP button for approximately 2 seconds.
To play track: Press the POWER/PLAY/PAUSE/STOP
button.
To select a different track: Press the FWD or REV
buttons.
To search through a track: Press and hold the FWD or
REV buttons.
To momentarily pause track: Press the POWER/PLAY/PAUSE/
STOP button when track is playing. indicator appears.
To resume track: Press the POWER/PLAY/PAUSE/STOP
button when track is paused.
To adjust volume: Press the VOL + or - buttons.
To stop track: Press and hold the POWER/PLAY/ PAUSE/STOP
button for approximately 2 seconds when track is playing.
Power off the unit: Press and hold the POWER/PLAY/
PAUSE/STOP button for approximately 5 seconds .
To lock the buttons from accidentally being pressed: Slide
the HOLD switch to the on position. indicator appears.
Quick Start Guide
USB Cable
Deluxe Earbud
Headphones
1. Confirm player is powered up and connected to computer.
2. On your Desktop, double-click the "My Computer" icon.
3. Drag and drop files onto the MP120/MP320 drive ("Removable Disk").
NOTE: The player stores all types of formatted files. However, it
will only play MP3, WMA™, and WMA™ with DRM™ (copy
protected) formatted files.
NOTE: To transfer WMA™ with DRM™ formatted files to
MP120/MP320, please visit www.emersonradio.com for details.
• Your player will have slightly less memory available than stated due
to the necessary memory needed for its firmware.
NOTE: If you are using Windows® 98, you must first download
and install the driver from www.emersonradio.com.
3
Warranty
Information
Warranty Card
1
2
"AAA"
BATTERY
3
UME
N
A
B
1
3.5mm
3
4
A
1
2
B
HOLD 'Off'
PRESS & HOLD
TO POWER ON
2
2
Pouch
Armband
MP120/MP320 Player
N
ME U
ME
NU
MEN
U
M
E
NU
M
EN
U