Filter
Top Products
26
NOTE: If you are using either the 30GB or 60GB fifth generation iPod
®
models with video capability, use the adapters that were supplied with the
iPod
®
at time of purchase. They will fit correctly in the docking cradle of
this system.
IMPORTANT!
If you are using an iPod
®
nano you must slide the docking connector to the
‘left’ position before inserting the required adapter as shown in the following
illustrations:
If later you decide to install a different iPod
®
model you must remove the nano
adapter from the docking cradle and slide the docking connector back to the
‘right’ position before inserting the appropriate adapter.
3.) Slide your iPod
®
into the adapter and make sure that it slides down as far as
possible until it is correctly seated on the iPod
®
connector.
4.) Press the Power button of this system to turn the power ‘On’.
5.) Press the Function button of this system to select
the iPod function. The “iPod” indicator appears in
the display.
iP500_030606r.p65 6/3/2006, 15:0926