Emerson iP500 MP3 Docking Station User Manual


 
26
Connecting and Playing Your DockableiPod
®
(Refer To Separate Instructions For The iPod
®
Shuffle)
IMPORTANT: To avoid any unwanted distortion when listening to your iPod
®
through the speakers of this system we recommend that you shut off the
equalizer in the iPod
®
before inserting it in the docking station of this system.
To shut off the iPod
®
equalizer, go to the “Main Menuin your iPod
®
, scroll to
the Settingsmenu, select the EQsetting and turn the EQ Off’.
1.) The Hold switch on your iPod
®
should be set to the Offposition to unlock the
click-wheel navigation controls.
2.) Remove the docking cradle from the front panel by sliding the cradle upward
as shown. If you have not already done so turn the cradle over and press on
the bottom of the connector cover to remove it from the cradle. Discard the
paper dummy iPod
®
”.
3. Choose the appropriate adapter for your particular iPod
®
model from among
the 6 adapters supplied with this system and insert the adapter into the docking
cradle as shown. (Refer to the iPod adapter chart).
Then re-install the docking cradle in the front panel.
iP500_042307.p65 23/4/2007, 17:0026