Filter
Top Products
9
SETTING THE CLOCK
Note: The clock can be set with the radio ‘Off’. Or if the radio is ‘On’, press the
MODE button once to the clock mode.
1.) Press the MODE button for at least two seconds. The time display begins to
flash.
2.) While the display is flashing press the TUNING – /HOUR button to adjust the
hour. Be sure to set correctly for AM or PM.
3.) Press the TUNING + /MIN button to adjust the minutes.
4.) When the display shows the correct time, press the MODE button once more
or after 5 seconds, the display stops flashing and the clock begins to run.
Note: The correct time will always appear on the display when the radio is ‘Off’.
HK2227BL_120203.p65 2/12/2003, 14:219