Filter
Top Products
Part No.: 16-2805
012-01
Emerson Radio Corp.
Consumer Affairs Dept.
1901 Diplomat Drive
Farmers Branch, TX75234.
1-800-898-9020
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Printed in China
CAUTION :
Never use chemicals such as benzene or paint thinner for cleaning, otherwise the case may be deformed or discolored.
What does this warranty cover ? Any manufacturing defects in original material,
including original parts and workmanship, under normal use and conditions.
For how long? For a period of ninety (90) days from the date of original purchase in
the U.S.
What will we do ? If you need service under this Warranty, and you provide us with
the dated proof of purchase, we will provide repair service at no charge for labor and
parts at an authorized Depot Repair Facility, or replace the product in our discretion.
How do you make your warranty claim ? If it becomes necessary to repair your
unit, you can obtain the name and mailing location of a Depot Repair Facility by dialing
1-800-695-0098. You should pack your unit in a well-padded heavy corrugated box,
enclose your check or money order payable to the Depot Repair Facility in the amount
of $9.00 to cover the return shipping and handling costs, and enclose a copy of your
proof of purchase (warranty service will not be provided without a dated proof of
purchase). Finally, you should ship the unit prepaid via UPS or parcel post (insured).
What does your warranty not cover ? Your warranty does not cover the following:
• Damage from negligence, misuse, abuse, accident, or failure to follow operating
instructions.
• Use of product in a commercial application or rentals.
• Changes or repairs by anyone other than an authorized Depot Repair Facility.
• Damage because your unit is improperly connected to the equipment of other
manufacturers.
• Unit on which the serial number has been defaced, modified or removed.
• Damage to equipment not properly connected to the product.
• Cost incurred in shipping your unit to and from an authorized Depot Repair Facility.
• Ordinary adjustments which you can perform as outlined in the owner’s manual.
• Signal reception problems caused by external antenna or cable systems.
• Products purchased, used, serviced, or damaged outside of the United States.
• Damage to compact discs or cassettes.
What other limitations apply to your warranty ?
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE
ORIGINAL PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT
OWNERS OF THE PRODUCT. THIS WARRANTY IS VALID ONLY IN THE
UNITED STATES OF AMERICA. ANY APPLICABLE IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN
DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED
ABOVE BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL
AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALL
APPLY TO THE PRODUCT THEREAFTER. WE MAKE NO WARRANTY AS
TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR
USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS
THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT
WILL OUR LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE
PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES WILL WE
BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION
WITH THE USE OF THIS PRODUCT.
How does state law apply to your warranty ?
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, BUT YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME
STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGE, SO THESE RESTRICTIONS MAY NOT APPLY TO YOU.
AU898F
EMERSON RADIO CORP.
LIMITED WARRANTY
4. Slide the POWER switch to the ‘ON’ position. The display will come on and show either an AM or FM radio frequency, depending
upon the setting of the BAND selector switch. Tune to your desired frequency by pressing either the TUNING ‘UP’ or ‘DOWN’ button
repeatedly until the frequency of your station appears on the display. If either the TUNING ‘UP’ or ‘DOWN’ button is held for approximately
two seconds, the tuner automatically scans up or down to the next strong station and stops on that station.
NOTE: If the tuner does not stop on the exact frequency of the station, press either the TUNING ‘UP’ or ‘DOWN’ button again until the
exact frequency of the desired station appears in the display. If you are listening to a FM station and that station is broadcasting
in stereo, the ‘ST’ indicator will appear in the display.
5. Adjust the VOLUME and the BBS (Bass Boost) controls, as desired.
6. If you are carrying the radio in a backpack, handbag etc. while you are listening, you may press the LOCK button to disable all of the
front panel controls. This will prevent the station from changing accidentally if something in your handbag or backpack accidentally
presses against the TUNING ‘UP’ or ‘DOWN’ button. When the lock feature is engaged, the LOCK indicator appears in the display.
Press the LOCK button again to cancel the lock feature and resume normal operation.
7. When you are finished listening, slide the POWER switch to the ‘OFF’ position to turn the radio off. Remember that just removing the
headphones does not turn the radio off. If you do not set the POWER switch to the ‘OFF’ position, the radio remains ‘ON’ even if the
headphones are not connected, and the batteries will continue to drain.
To Store a Station in the Tuner Memory
Up to 20 stations (10 AM and 10 FM) can be stored in the Tuner Memory.
1. Tune to the first station you wish to memorize as described in the previous section.
2. Press the MEM button. The MEMO indicator will blink in the display.
3. While the MEMO indicator is blinking, press either the MEM.CH
or button to select one of the ten Preset Memory locations, then
press the MEM button again to enter your desired station into that preset memory location number.
4. Repeat Steps 1 through 3, above, to continue entering up to 10 stations in each band.
5. After you have finished storing stations in the Memory, you can recall any of the stored stations by simply pressing the MEM.CH
or
button until the desired preset number and radio frequency appears in the display.
NOTE: To change any of the stations stored in memory simply enter a new station in the desired memory location. The previously
stored station will be replaced by the new station.
Using Bass Boost switch
To increase the bass response, slide the BBS (Bass Boost) switch to the ‘ON’ position.
Antennas
The AM band has a built-in ferrite bar antenna which provides adequate reception in most areas.
The FM antenna is built into the headphone cord. Be sure to extend it for best reception.