Filter
Top Products
10
OPERATING INSTRUCTIONS
Special Functions
HOLD Switch (On Wired Remote Control Only)
The HOLD switch on the side cabinet of the wired remote control must be in the
‘Off’ (left) position to start the CD player with the wired remote control. While the
HOLD switch is ‘On’, all of the controls on the Wired Remote Control are disabled.
This prevents the player from starting accidentally by something pressing against
the (Play/Pause) button.
After you begin CD playback you may also slide the HOLD switch to the ‘On’ (right)
position to disable all the controls on the Wired Remote Control.
DBBS ON/OFF Switch (On Bottom Cabinet)
During CD playback you may slide the DBBS switch to the “ON” position to activate
the Bass Boost function as desired.
“On”
“Off”
HD9116_041006.p65 10/4/2006, 9:1010