Filter
Top Products
8
To change the default time zone display, depress
the TIME ZONE button. The number “0” will
appear on the display indicating that the default
zone is ZONE 0 (GMT – 0) Time.
Hold the TIME ZONE button and then press either the SET + or – buttons until
your own time zone appears on the display, then release the buttons.
The clock display will change to the correct time in the time zone you selected. The
clock will always return to the correct time in the zone you selected after every
power interruption.
If you move to a different time zone, simply change the default zone display to the
new zone and the SmartSet
®
will remember that setting for you.
OPERATIING INSTRUCTIONS
Setting The Time, The First Time
IMPORTANT: The first time you connect your new SmartSet
®
clock radio to
the Mains outlet the internal computer will automatically set the time correctly
for “GMT” which is the initial default setting. The display will scan for a few
seconds and then show the correct Day and Time. Your clock is set correctly
and running.
If you do not live in the “GMT” Time zone you must change the default zone display
to your own zone. You only do this one time and the SmartSet
®
will remember the
new default zone setting and will always return to that setting after a power
interruption.
There are 24 time-zones programmed into your SmartSet
®
clock radio as follows:
0 : GMT – 0 1 : GMT – 1 2 : GMT – 2 3 : GMT – 3
4 : GMT – 4 5 : GMT – 5 6 : GMT – 6 7 : GMT – 7
8 : GMT – 8 9 : GMT – 9 10 : GMT – 10 11 : GMT – 11
12 : GMT +/– 12 13 : GMT + 11 14 : GMT + 10 15 : GMT + 9
16 : GMT + 8 17 : GMT + 7 18 : GMT + 6 19 : GMT + 5
20 : GMT + 4 21 : GMT + 3 22 : GMT + 2 23 : GMT + 1
CKS5060_090606.p65 6/9/2006, 9:468