Filter
Top Products
MANUAL TIME
ADJUSTMENTS
Some
people
like to set their clocks
5 to
10 minutes fast to
make sure that they
will
always be on
time. Even though
the SmaftSet@
sets the
time by
itself,
you
still
have
the
option of adjusting
the time
manually
if
you
wish.
To manually adjust
the time display
depress and
hold the
TIME button, and
press
either the SET
+
or SET
-
buttons
to adjust
the time display
ahead or back
as
desired.
Each
press
of the
SET
+
or SET
-
buttons
will
change
the display by one
minute. lf
you
hold the SET
+
or
SET
-
buttons
the display
will
continue
to change.
The display
will
change
slowly at
first,
one
minute at
a time. But if
you
continue
holding the SET
+
or
SET
-
buttons the display
will
change
rapidly.
NOTE: lf
you
manually adjust
the time,
your
new setting
is
entered
into the
SmartSet@
memory. lf the
power
is interrupted,
the display
will return
to
your
new setting, not the
original setting,
when the
power
is restored.
ADJUSTING THE
WAKE
UP
TIMES
Your SmartSet@
clock radio
has two separate alarms
that can be set and used
independently.
You may use the alarms
to wake two
people
at different times, or
you
may use one alarm
for
weekdays
and
the other
for weekend
wake
up times.
The
procedure
for
adjusting
the wake up time
is the same
for both Alarm 1 and
Alarm 2.
1
.) Depress
and
hold either the
ALM 1 or
ALM 2 setting button.
The main display
will change from the correct
time to the
Alarm
1
or
Alarm 2
wake
up time.
2.) While holding the
ALM 1 or ALM 2 setting
button, depress
either the SET
+
or
SET
-
button
to move the display
ahead or back
to
your
desired
wake
up time.
3.)
When
the
desired
wake
up
time appears on the
display,
release
all
buttons.
NOTE:
Be
sure that
you
have
set the
wake up time
correctly by observing
the
AM indicator,
lf
the
AM indicator
is
'On'
the wake up
time is
"AM".
lf
the
AM indicator is
'Off',
the
wake up time
is
"PM".