Filter
Top Products
12
If the lithium battery is exhausted and you experience an interruption in the AC
power supply, the clock will reset itself to its initial default setting when the power
is restored. The initial default setting is 6:00 AM, Thursday, January 1st (1. 1),
1998. If you notice that the time on your SmartSet
®
clock radio is completely
incorrect, and the month/date and day indicators are also wrong, press the Time
and Date buttons together to see the year. If the year display is showing “1998”
you probably experienced a total memory loss. To reset the clock after a total
memory loss, proceed as follows:
1. Follow the instructions on page 10 and install a new CR2430 lithium battery in
the battery compartment.
2. Connect the radio to your AC outlet and let the clock set itself.
3. Depress the Time and Date buttons together. The small display will change
from ‘month/date’ to ‘year’.
4. While holding the Time and Date buttons, press the Up (or Down) button to set
the small display to the correct year, then release the buttons.
5. Depress the Date button and the Up (or Down) button to set the small display
to the correct month and date. The Day indicator will change automatically as
you adjust the month/date settings. When the correct month and date appear
on the display, release the buttons.
6. Depress the Time button and the Up (or Down) button to set the main display
to the correct time. Be sure to confirm that you have set the time correctly to
‘AM’ or ‘PM’ by observing the AM indicator.
7. After you set the time, reconfirm that the Day and Month/Date displays are
still correct. Make final adjustments if necessary.
SmartSet
®
clock memory is now reset and the new lithium battery will maintain it
for the next 5 to 8 years, depending on the number and duration of the power
outages you experience.
IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm
mode settings, and sleep timer settings as well.