Emerson CKS1850 Clock Radio User Manual


 
13
WAKE TO RADIO
1.) Turn the radio On and select the band, station, and volume level that you wish
to hear when the alarm comes on, then turn the radio Off again.
2.) Reconfirm the wake up time and alarm mode settings for the alarm you are
using, Alarm 1, Alarm 2, or both alarms.
3.) Set the ALARM selector switch for one or both alarms to the RADIO position.
The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the
alarms are set.
4.) At the selected wake up time the radio will turn On. It will play for one hour and
then shut off automatically.
5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2
button, or press the RADIO ON/OFF button. The radio will stop but the alarm
remains set and will turn the radio on again at the same time on the following
day (depending on the Alarm Mode setting).
6.) If you do not want the alarm to turn the radio on the following day, set the
appropriate ALARM selector to the OFF position.
CKS1850-1851_072706.p65 27/7/2006, 16:1313