Filter
Top Products
Wake to AM radio: Press the POWER button to turn on the unit, Press
Function button to select AM radio and then press or button to select
your desired radio station. Then press the POWER button to turn Off the unit.
Press the ALARM 1 or ALARM 2 button repeatedly until the display shows
"r-A" (wake to AM radio) and AL1 or AL2 indicator turns On. Please wait for 3
seconds, then it will automatically quit out to confirm the wake up mode setting.
Wake to FM radio: Press the POWER button to turn on the unit, Press
Function button to select FM radio and then press or button to select your
desired radio station. Then press the POWER button to turn Off the unit. Press
the ALARM 1 or ALARM 2 button repeatedly until the display shows "r-F"
(wake to FM radio) and AL1 or AL2 indicator turns On. Please wait for 3
seconds, then it will automatically quit out to confirm the wake up mode setting.
Alarm Time Setting : Press the POWER
button to off the unit, press and hold
the ALARM 1 or ALARM 2 buttons the Hour time will blink, then press the
or
buttons to adjust the hour alarm time forward and backward as desired.
Press the ALARM 1 or ALARM 2 buttons again the Minutes time will blink,
and then press the or buttons to adjust the minute time forward and
backward as desired, then press Alarm1 or Alarm 2 button again to confirm
the alarm time. After the alarm time was set, you have to set the wake up
mode (Buzzer alarm or FM radio or AM radio or CD). To select the wake up
mode, press ALARM 1 or ALARM 2 repeatly, the display will appear "bb"
(Buzzer alarm), "r-F" (FM radio), "r-A" (AM radio), "cd" (CD alarm), "OFF"
(Alarm off) cyclically. Select your desired wake up mode. After the wake up
mode is selected, please wait for 3 seconds and the alarm setting is
confirmed.
Check the Alarm Time: During CD or radio, press the
ALARM 1 or ALARM 2
buttons once to display the alarm time then the wake up alarm source will auto-
matically show next.
16
Alarm Operation
Setting the ALARM Time (Wake Up time)
This clock radio has two separate wake-up
alarms that can be set and used independently.
To set or adjust the wake-up times please proceed as follows:
Activate or Deactivate the Wake-up Mode
After you have adjusted the wake-up times on one or both alarms, you must
activate the alarms and select the wake-up mode. You have the option of waking
to the buzzer, radio or CD.
Setting the Wake Up Mode: Press the POWER button to off mode, press the
ALARM 1 or ALARM 2 buttons repeatly to select the wake-up mode. Once
the wake up mode is activated the AL1 or AL2 indicator will light on the display.
AL2
AL1
AM
NOTE: If Alarm 1 and Alarm 2 are set in same alarm time, only Alarm 1 will
sound.