Filter
Top Products
18
Programmed Playback
Use the Programmed Playback feature to play up to 20 tracks on a disc in any
desired order. You may also program a particular track to play several times within
a programmed sequence if desired.
Note: You cannot program a disc while it is playing. Press the STOP button to
stop playback and then follow the programming steps below.
1.) Load your disc as usual and wait until the display
shows the total number of tracks on the disc.
2.) Press the PROGRAM button on the front panel.
The PROGRAM indicator flashes and Program
number “P 01” appears in the display.
3.) Press the SKIP/SEARCH FWD or SKIP/SEARCH REV buttons to select
the first track number to be programmed.
Example: Track number 07.
When the desired track number flashes in the
display press the PROGRAM button again.
Track “07” is now entered in Program Memory
number “01”. The program number advances
to “P 02”.
Important: You must enter a track number in the program memory while
the PROGRAM indicator is flashing. If the PROGRAM indicator stops
flashing and the display returns to the correct time, press the PROGRAM
button again and then select the desired track number within 10 seconds.
4.) Repeat step 3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
To confirm the program after you have entered the last track press the
PROGRAM button repeatedly. The display will scroll through all the tracks you
programmed in sequence.
PM
AL 1
AL 2
PM
AL 1
AL 2
PM
AL 1
AL 2
PM
AL 1
AL 2
CKD2300_060305.p65 3/6/2005, 11:0418