Filter
Top Products
12
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be played.
NOTES:
• Press the REPEAT button twice during program playback to repeat the
program repeatedly until the STOP (■) button is pressed.
• Press the STOP (■) button to stop the disc before it is finished.
• To cancel program playback, while in stop mode, press the PROG button
until the PROG indicator blinks, then press the STOP (■) button.
• Each track may be stored in the program memory as many times as desired
(up to 20 tracks).
Turn the unit on and slide the
FUNCTION switch to the CD position.
1
Press the PROG button ❶, “P 01” will
appear in the display and the PROG
indicator will blink. Within eight seconds,
press the SKIP/Search/HOUR ❷ or
MINUTE button ❸ to select the
desired track to program.
1
2
3
2
Press the PROG button ❶ to
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 20 tracks. Press the
PLAY/PAUSE
(
) button ❷ to begin
program playback and adjust the
VOLUME control ❸ as desired.
3
2
1
3
To skip forward or backward through
the programs, press the SKIP/
Search/HOUR ( ) ❶ or SKIP/
Search/MINUTE ( ) ❷ button. When
the disc is through playing, it will stop.
1
2
4
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 12