Filter
Top Products
PLAYBACK
1. Set the “FUNCTION” selector to “CD / MP3 / WMA” mode.
2. Open the CD door and place a CD / MP3 / WMA disc with the label up in the CD compartment.
3. Close the CD door.
4. Press the “PLAY / PAUSE” button to start playing CD / MP3 / WMA disc.
5. Adjust the “VOLUME” control to the desired level.
6. Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
7. Press the “STOP” button when finished.
PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “P01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button. (You may select a desired album by pressing the “ALBUM”
button).
3. Press the “PROGRAM” button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to play the disc in the order you
have programmed.
6. Press the “STOP” button twice to terminate programmed playback.
MODE
Press the “MODE” button before or during playing CD / MP3 / WMA disc, each press switches the mode function as follows:
1 - REPEAT 1
2 - REPEAT ALBUM (*MP3 / WMA ONLY)
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
TECHNICAL SPECIFICATIONS
General
Power consumption: AC 230 V
~
50 Hz
DC 9V 6 x C/UM-2/R14 batteries (not included)
Frequency range: AM 525 - 1615 kHz
FM 87,5 - 108 MHz
Measurements: 236 x 118 x 227 mm
Weight: 1,6 kg
14.
REP
REPEAT 1
REP
ALBUM
REPEAT ALBUM
NORMAL
PLAYBACK
RAND
RANDOM
REP
ALL
REPEAT ALL
02-6696-GB 9/12/06 9:17 AM Page 14