Filter
Top Products
21. 20.
3. Press PROG to store the track. 002 appears in the display; you can now store the second track.
4. Repeat steps 2 and 3 to select and store the desired tracks. You can store up to 20 tracks.
5. Press to start program playback; PROG appears in the display.
DELETE THE PRESET TRACKS
During stop mode press PROG to recall all preset tracks, and press , or open the CD drive, or
press POWER, or set the FUNCTION SELECTOR to RADIO, USB or BUZZER.
SELECT DIFFERENT PLAYBACK MODES: REPEAT AND SHUFFLE
You can select a playback mode prior or during playback. You can combine repeat and program
functions.
SHUFFLE: Play all tracks in arbitrary order.
REPEAT: Repeat current track.
REPEAT ALL: Repeat complete disc.
SHUFFLE REPEAT ALL: Repeat all tracks of the disc in arbitrary order.
CONTINUOUS REPEAT AND RANDOM REPEAT FUNCTION
1. Press SHUF/REP once or repeatedly to select a playback mode. The different playback modes
appear in the display respectively.
2. Press during stop mode to start playback. During shuffle mode playback starts
automatically after a few seconds.
3. To return to normal playback, repeatedly press SHUF/REP until the playback modes disappear
from the display. By pressing you can also return to normal playback.
Note:
When you select the shuffle mode during playback, it will not be activated until the current track has
elapsed. The shuffle mode is not available during program playback.
CONNECTING AUXILIARY DEVICES
You can also connect auxiliary devices for audio playback on the speakers of the clock radio.
1. Press POWER to turn on the unit. The display lights up.
2. Connect the supplied line-in cable to the AUX input jack of the clock radio and to the audio or
earphone output jack of the auxiliary device (CD player, video recorder, etc.).
AUX appears in the display.
The AUX mode overruns the activated CD or radio mode.
MP3 PLAYBACK FROM USB REMOVABLE DISK
1. Press POWER to turn on the unit. The display lights up.
2. Set the FUNCTION SELECTOR to USB; the unit shortly displays USB and then returns to
display of time.
3. Connect your USB device to the USB port; the display shows USB and WMA or MP3,
depending on the format.
4. Make sure your USB device contains MP3 music files in MP3 or WMA format.
5. The unit decodes the first file and automatically starts playback. If playback does not start
automatically, please press .
6. Press or to skip to previous or next file; press to start or pause playback; press
to stop playback.
7. During pause mode the file number is blinking in the display.
MP3 PLAYBACK FROM MP3 PLAYER
1. Connect your MP3 player to the USB port using the USB cable (battery of MP3 player will not
recharge).
2. You can control playback using the control buttons on the clock radio (as described above).
SETTING THE CLOCK
Time is displayed in 24-hour-format.
1. Press and hold CLOCK until you see the hour digits blinking in the display. The display will
return to normal mode if there is no operation within 5 seconds.
2. Press to adjust the hours (or press and hold for quick adjustment).
3. Press CLOCK to confirm the hour settings. Now the minute digits are blinking in the display.
4. Press to adjust the minutes (or press and hold for quick adjustment).
5. Press CLOCK to confirm your settings.
RADIO RECEPTION
1. Press POWER to turn on the unit. The display lights up.
2. Set the FUNCTION SELECTOR to RADIO position; the display shows TUNER.
3. Set the BAND to FM ST., FM or AM.
4. Search your desired station using the TUNING knob.
5. Use VOLUME to adjust the volume settings.
6. Press DISPLAY twice to display the radio station information. The display will show the
frequency range and frequency for a few seconds, then returns to display of time.
7. Press POWER to turn off (Stand-by) the unit. The backlight turns off.
IMPROVE RADIO RECEPTION
FM: Completely uncoil the wire antenna for best reception.
AM: The unit uses a built-in ferrite antenna. Direct the unit for best reception.
CD PLAYBACK
1. Press POWER to turn on the unit. The display lights up.
2. Set the FUNCTION SELECTOR to CD position; the display shows Cd.
3. Open the door of the CD drive.
4. Insert a disk with the printed side facing up and close the door of the CD drive. The unit shortly
displays CD and then starts playback automatically.
5. If playback does not start automatically, please press for playback.
6. Press DISPLAY twice to display theCD track information. After a few seconds the unit returns to
display of time.
7. Use VOLUME to adjust volume settings.
8. To temporary pause playback (pause), press . Press again to resume playback at the
same position. The track number is blinking in the display.
9. Press to completely stop playback. The display shows the total number of tracks.
10. Press POWER to turn off CD playback (Stand-by). The backlight turns off.
Skip to a certain track
• Use to skip to previous or next track; numbers are shown in the display.
• During stop mode press to select a track and then press to start playback.
Search a certain position within a track
1. During playback press and hold or . The CD will fast rewind or fast forward at higher
speed and reduced volume.
2. The unit will resume normal playback when you release the buttons or .
PROGRAMMING TRACKS
You can program up to 20 tracks in arbitrary order. Multiple programming of one track is possible.
1. During stop mode press PROG; the display will show PROG and P01.
2. Use or to select a desired track.