Elta 4556 Clock Radio User Manual


 
RESET
- The reset button (17) is located on the bottom of unit.
- Use a ballpoin pen to press it whenever you change batteries, or unit is not performing as expected.
- This will return all settings to default value, and you will lose any stored data (alarm and clock settings).
CAUTION
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Do not place the unit in closed bookcases or racks without proper ventilation.
- To prevent Fire or shock hazard, do not expose unit to rain or any type of moisture.
- The unit should not be exposed to direct sunlight, very high or low temperatures, moisture, vibrations or -
placed in a dusty environment.
- Do not use abrasive, benzene, thinner or other solvents to clean the surfaces of the unit. To clean, wipe
it with mild non-abrasive detergent solution and clean soft cloth.
- Never attempt to insert wire, pins or other such object onto the vents or openings or the unit.
SPECIFICATION
Frequency range: AM 525 – 1615 kHz
FM 87,5 – 108 MHz
Output Power: 280 mW
Speaker Impedance: 8 ohm
Battery backup: 1 x CR2032, 3V Flat Lithium (not included)
Power source: AC 230V
~
50 Hz, 5 watts
ATTENTION: FOR SAFETY USAGE
Please select the correct voltage before plug in the AC power cord to a Household outlet. Otherwise, it may
cause damage to the unit.
Dripping warning:
The proudct shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the product.
Ventilation warning:
The normal ventilation of the product shall not be impeded for intended use.
019.
02-4556_EN 6/1/06 10:20 AM Page 09