Elta 4521 Clock Radio User Manual


 
21. 20.
4. SWITCH DISPLAY CONTENT
Press (8) to enter the calendar year display during normal mode. After 5 seconds the unit
automatically turns back to normal mode.
Display showing calendar year
Press (7) to enter the date display (month and day) during normal mode. After 5 seconds the unit
automatically turns back to normal mode.
Display showing date (month and day)
5. TURNING OFF WITH SLEEP TIMER
Press SLEEP (10) during radio mode (see below) to display the sleep timer. The minute display is
blinking and with each touch you shorten the time at which the radio will automatically turn off. You
can choose between 90, 60, 30 and 15 minutes. The display shows SLEEP. By pressing (9) you
can turn off the radio prior to the timer.
Display showing sleep timer
Display showing sleep timer (during radio mode)
6. DAYLIGHT SAVING TIME
During normal mode press (8) for about 5 seconds in order to activate / deactivate the summer
time. Time display will change by one hour and will display .
Summer time activated
7. THERMOMETER
The room temperature is displayed in the range from 0ºC to + 50ºC or from 32ºF to 122ºF. You can
switch between Celsius and Fahrenheit mode by pressing C / F (5).
8. RADIO
Press (9) to turn on the radio.
Set the band selector AM / FM (18) to FM or AM.
With the TUNING (15) knob you can search your favourite station.
Turn the VOLUME + / - knob to adjust the volume.
Press (9) to turn off the radio.
Antenna
The radio has a built-in ferrite antenna for AM reception. For better reception you have to direct the
unit.
There is a FM wire antenna at the rear side of the unit. Uncoil completely for best reception.
9. SETTING THE TIME FOR THE PROJECTOR.
Turn off the unit by pressing ON / OFF (17).
Adjust the focal length with the FOCUS adjusting wheel (24).
You can turn the projector by 90º and hence direct it towards the ceiling or a wall.
Notes:
Only in a dimmed room can you see the projected time. The range accounts for 1 to 3 meters.
Reset Button
The RESET button is located on the bottom side of the device and needs to be pressed after
changing batteries or malfunction. With this button you can delete all settings and reset to default
settings.
TECHNICAL SPECIFICATIONS
Frequency range : MW (AM) 525 kHz - 1615 kHz
UKW (FM) 87.5 MHz - 108 MHz
Speaker Impedance : 8 Ω
Battery Backup : 3 x 3 V CR 2025 Lithium cell batteries (not included)
Power Supply : AC 230 V ~ 50 Hz
Power Consumption : 5 Watt
Weight : approx. 0.7 kg
Dimensions : approx. 101 x 101 x 153 mm
SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.