Elta 4518 Clock Radio User Manual


 
5. CHANGE DISPLAY CONTENT
Press button (8) during normal can switch to display Month and day, after 5 second timeout and return back to display
time.
Display Show Month and Day
6. SLEEP FUNCTION
During Radio on mode, press Snooze/Sleep button (10) to turn on Sleep mode, the Sleep time will keep flashing by 5
second, within 5 second and press Sleep button can change the duration from 90 min - 10 min. Press Power button (9) to
cancel sleep function.
Display Show Setting Sleep Duration
Display Show Under Sleep Mode (Radio Now Turn On)
DST - Daylight Saving Time
Press button (8) and hold for 5 seconds to toggle on and off DST Function.
Display Show turn DST icon On
7. THERMOMETER FUNCTION
Remark:
Temperature Range for Indoor: 0 to + 50°C or 32 to 122°F.
RADIO OPERATION
- Press the Power on/off button (9) to turn radio on
- Select AM or FM band using the wave band switch (15)
- Select the Station using the tuning control (16)
- Turn the volume control (14) to adjust volume as required
- Press the power on/off button (9) to turn radio off.
Note:
- The AM band use an internal directional aerial. Rotate the radio for best reception.
- Ensure that the FM cord antenna (20) is completely unrolled and extended for best FM reception.
RESET
- The reset button (17) is located on the back of unit. Use a ballpoint pen to press it whenever you change the batteries,
or unit is not performing as expected. This will return all settings to default value, and you will lose any stored data (alarm
and clock settings).
16.
02-4518-EN.qxp 12/4/06 3:02 PM Page 16