Filter
Top Products
013.
CD Memory
Up to 20 tracks can be programmed for disc play in any order.
Before use, be sure to press “STOP” button.
1. Set “CD/MP3/WMA” mode.
2. Press the “PROGRAM” button, the display will show “P01”, moreover, it will indicate program no. and digits for track no.
3. Select a desired track by using the skip buttons.
4. Press the “PROGRAM” button again to confirm desire track into program.
5. Repeat step 2 and 3 to enter additional memories into the program.
6. When ALL the desired tracks have programmed. Press “PLAY/PAUSE” button to play the disc in the order you have
programmed.
7. Press “STOP” button twice to terminal program play.
Radio Operation
1. Set the function selector to “RADIO” position.
2. Select desire Band (Radio frequency Digit will appear on display).
3. Adjust radio frequent to your desire station by using the tuner control.
4. Adjust Volume Control for volume level.
FM / FM-Stereo Reception
• Set to FM mode position for “MONO” reception.
• Set to “FM-ST” position for “FM-Stereo” reception. The Stereo indicator light up to show “FM Stereo” mode.
Clock
To adjust Clock setting, make sure unit are in CD Function.
1. Press “SET” button on unit back.
(DO NOT RELEASE “SET” BUTTON DURING TIME SETTING)
2. Press “HOR” button to set Hour.
3. Press “MIN” button to set Minute.
4. Release all button to confirm setting.
• Confirmed setting will appear on display.
Operating MP3/WMA
1. Switch to “CD/MP3/WMA” mode, unit will turn “ON” automatically.
2. Press “OPEN” button to open CD door (“-“ and present time appears on display).
• Place the disc with label facing up on the disc tray.
• Hold the disc without touching either of its surface position with printed title side facing up, align it with the guides
and place it in its proper position.
3. Close the CD door unit it “Clicks” (Total track number in Disc on display).
4. Press “PLAY” button Disc play automatically.
5. Stopping play.
Press “STOP” button once to stop play.
• If you press the “PLAY” button again, play starts automatically from first track.
Skip and Searching
Next or Back Button:
Press these buttons to go to the previous / next track.
Repeat
The repeat functions that you can enjoy are dependent on the disc types played.
CD: All tracks repeat, single track repeat and given.
1. Press “MODE” key once.
2. LCD will display “REP” = repeat of 1 track.
3. Press “MODE” key again to repeat all.
4. Press “MODE” key again to repeat album.
5. Press “MODE” key again to random mode.
6. Press “MODE” key again to normal playback.
02-2311-EN 12/2/05 11:09 AM Page 013