Filter
Top Products
GENERAL FEATURES
31
HIPOWER - High power
LOPOWER - Low power
KP_LOCK - Keypad disabled
KP_ENAB - Normal operation
KP_MUTE - Key press tone disabled
PTT_0TN - Proceed tone disabled
PTT_1TN - Single (standard) proceed tone
PTT_2TN - Dual (loud) proceed tone
565220x - Version number of the radio operating software.
3. To save the selected configuration and exit the menu mode, press
FCN. This also occurs automatically if no key is pressed for 3
seconds.
For example, if you want to disable the keypad, select the menu
mode and then press the key to select the “
KP_xxxx” group.
Press the PTT switch to display “
KP_LOCK” and then press FCN
(or wait 3 seconds) to select that configuration. Turning power off
does not change any menu mode parameter.
Phone Mode
Introduction
The phone mode allows a telephone number to be entered at
any convenient rate, any dialing errors corrected, and then the
number can be transmitted when desired. It also allows up to six
numbers to be stored in memory and later recalled. This mode is
available only with transceivers which have the telephone keypad.
While in the phone mode, the selected system/group can be
changed only by the quick select switch because the SYS and GRP
keys become RCL and CLR keys. Selection of the phone mode is
optional when receiving a call because it does not enhance
operation.