Filter
Top Products
EASTERN ACOUSTIC WORKS
One Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. •MQV1366 PUB#888169/2p/4/1/00 • Printed In USA
A
C
O
U
S
T
I
C
A
L
P
E
R
F
O
R
M
A
N
C
E
P
A
R
T
N
E
R
S
H
I
P
TECHNICAL SPECIFICATIONS MQV1366
FEATURES
•Full Range VA4™ loudspeaker system
•Optimized for permanent install only
•Direct radiating 15-inch woofer in optimally vented
enclosure
•Horn loaded 10-inch cone with VA4™ phase plug
•2-inch exit/75mm voice coil compression driver on
constant directivity horn
DESCRIPTION
The MQV Series is part of the next generation of permanent
installation loudspeakers. Using VA4™ Technology developed
for the KF700 series, the MQV range replaces the ASV range
of virtual array systems.
The MQV1366 uses a single, direct radiating 15-inch woofer
in an optimally vented enclosure.
A single, horn loaded 10-inch midrange cone with a special
geometry is used which produces a time coherent wavefront
through the upper portion of the midrange that is critical to
vocal articulation. A phase plug with radial slots then serves
to reduce the mechanical resistance of the subsystem with-
out affecting the directivity of the source, allowing flawless
vertical arraying of multiple MQV modules
A high power 2-inch exit/75mm voice coil compression driver
is mounted on a constant directivity horn for consistent,
accurate dispersal of HF information.
APPLICATIONS
The MQV1366 is engineered as a full range component for
very large format arrays and is an effective tool in large-
scale permanent installations. Comprehensive mounting
points allow for flexible installation.
Applications include:
Large Church
Large Arenas
Stadiums
DESCRIPTIVE DATA
LF Subsystem 1x 15-in Woofer
MF Subsystem 1x 10-in Horn Loaded Cone
HF Subsystem 2-in Exit Compression Driver on
Constant Directivity Horn
Configuration Three-way, Full Range
Powering Triamplified
Cabinet Type (shape) Trapezoid
Enclosure Materials Baltic birch plywood
Finish Wear-resistant Textured Black
Paint
Connectors 1x 6-Terminal Barrier Strip &
1x NL8 Speakon
Suspension Hardware (16) 3/8”-16 Threaded Mounting
Points (4 each on top, bottom and
sides
Grill Powder Coated Perforated Steel
Dimensions Inches Millimeters
Height (front) 26.65 677
Height (rear) 15.3 389
Width 56.25 1429
Depth 25.59 650
Trapezoid Angle 12.5 Degrees per Side
Weights Pounds Kilograms
Net Weight 215 97.5
Shipping Weight 240 108.9